File: //usr/share/doc/giflib-devel-4.1.6/gifpos.html
<!doctype HTML public "-//W3O//DTD W3 HTML 2.0//EN">
<HTML>
<HEAD>
<TITLE>gifpos</TITLE>
<link rev=made href=mailto:esr@snark.thyrsus.com>
</HEAD>
<BODY>
Go to <a href="index.html">index page</a>.
<CENTER><H1>gifpos</H1></CENTER>
A program to change GIF screen size and/or reposition images. No test is made
to make sure changes will generate valid GIF files (i.e. images are still
confined to screen etc.)<P>
<H1>Usage:</H1>
<pre>
gifpos [-q] [-s Width Height] [-i Left Top] [-n n Left Top] [-h] gif-file
</pre>
If no gif-file is given, GifPos will try to read a GIF file from stdin.<P>
<H1>Memory required:</H1>
Line.
<H1>Options:</H1>
<DL>
<DT> [-q]
<DD> Quiet mode. Default off on MSDOS, on under UNIX. Controls printout
of running scan lines. Use -q- to invert.<P>
<DT> [-s Width Height]
<DD> Set the new screen dimensions, so for example
`-s 1000 800' will set screen to width of 1000 and height of 800.<P>
<DT> [-i Left Top]
<DD> set image relative to screen position, so for example
`-i 100 80' will set image left position to 100 and top position to 80.
This sets the position of the first image only.<P>
<DT> [-n n Left Top]
<DD> set image n relative to screen position, so for
example '-n 3 100 80' will set the third image position as in 2.<P>
<DT> [-h]
<DD> Print one line of command line help, similar to Usage above.<P>
</DL>
<H1>Author:</H1>
Gershon Elber
<HR>
<ADDRESS>Eric S. Raymond <A HREF="mailto:esr@thyrsus.com"><esr@snark.thyrsus.com></A></ADDRESS>
</BODY>
</HTML>